How do I factory reset my Xerox 3335?

How do I factory reset my Xerox 3335?

How do I factory reset my Xerox 3335?

To reset the system software from the Control Panel:

  1. Press the Log In/Out button on the Control Panel.
  2. Login as the System Administrator.
  3. Press the Machine Status button on the Control Panel.
  4. Select the Tools tab on Touch Screen.
  5. Select the Troubleshooting button.
  6. Select the Resets button.

How do I clear Xerox printer memory?

To clear device memory:

  1. On the printer Control Panel, press the Menu button. NOTE: To navigate through the menu, use the Up or Down arrow buttons.
  2. Navigate to Admin Settings, then press OK.
  3. Navigate to Service Tools, then press OK.
  4. Navigate to Clear Device Memory, then press OK.
  5. At the Are you sure?

How do I reset my toner?

Press the START button. Install the toner & drum back into the printer. Press the START button twice and close the front cover. The warning message should now be clear.

How do I reset my Xerox c70?

Method A: Restart the system In the user interface, click [System: Restart]. In a few moments, the system will begin an orderly shutdown of services.

How do I delete print history in Xerox?

Clear Job History

  1. Press the [Machine Status] button on the Control Panel.
  2. Select [Tools] on the Touch Screen.
  3. Select [Admin Settings].
  4. Select [Maintenance].
  5. Select [Clear Job History].
  6. To clear the job history, select [Start]. NOTE: To close without clearing the job history, select [Cancel].

How do I reset my Xerox printer remotely?

Restart the Printer From the Control Panel:

  1. Login as System Administrator at the Control Panel.
  2. At the control panel touch screen, touch Device, then touch Tools.
  3. Touch Troubleshooting.
  4. Touch Resets.
  5. Touch Software Resets.
  6. For Reset Options, select the type of reset that you want.
  7. Touch Restart.

What is Xerox easy printer manager for WC 3315?

Xerox Easy Printer Manager for WC 3315 Xerox Easy Printer Manager provides a single interface for Smart Panel, Network Scan, ScantoPC, and Printer Settings Utility. Released: 06/05/2012 Version: 1.02.17

How can I Reset my Xerox printer to factory settings?

To find the instructions to reset the machine please go to the support site for your machine and search on “reset” or “factory defaults”. Resetting will return the many stored parameters to the factory default values but the print counts and the Adobe firmware serial number will not be affected by the reset.

What do you need to know about Xerox printer manager?

Xerox Easy Printer Manager provides a single interface for Smart Panel, Network Scan, ScantoPC, and Printer Settings Utility. More details… Xerox PCFax provides the ability to send faxes directly from a PC. More details… Xerox Easy Printer Manager provides a single interface for Smart Panel, Network Scan, ScantoPC, and Printer Settings Utility.

Which is the best scan driver for WC 3315?

WIA / TWAIN Scan Driver for WC 3315 includes Scan Assistant. Scan Assistant is used to adjust scan settings and start the scanning process directly from your computer. Filename: Scan_Setup_v1.04.32.exe More details… PCL Driver. WHQL Certified. Supports 32 and 64 bit Operating Systems. Includes SetIP Utility. Filename: WC3315_PCL_v3.11.34.03.exe