How do you reset the oil change light on a Ford Explorer?

How do you reset the oil change light on a Ford Explorer?

Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “Hold Reset For Setup Menu” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.

How do you reset the wrench light on a 2006 Ford Explorer?

The wrench light on the 2006 Ford explore is the check engine light. There is no way to reset the check engine light on the vehicle.

What does service engine soon mean on Ford Explorer?

If the check engine light in your Ford Explorer starts flashing, that means that the problem needs immediate attention and your Ford should be transported in quickly. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.

What does it mean when car says oil change required?

What does it mean if the message center says “oil change required”? If the oil is allowed to go beyond the end of its life, it loses its ability to lubricate (called viscosity), and it builds up debris and can cause damage to your engine. Your car is designed with an oil change reminder system.

How do I reset my Ford wrench light?

Switch the ignition on, but do not start the vehicle’s engine. Press the accelerator and the brake pedals at the same time and hold them down for 30 seconds. After 30 seconds have passed, you will see the wrench light indicator disappear.

What does a wrench symbol mean on a Ford Explorer?

powertrain malfunction indicator light
The wrench warning light on Ford vehicles is the powertrain malfunction indicator light. When it illuminates, it means that the computer has detected an issue with your vehicle’s powertrain or four-wheel-drive system.

How do you reset car sensors?

How to Reset a Car Computer

1. Open up the hood.
2. Remove the positive terminal cable from the battery using your pliers or wrench.
3. Go to your fuse box in your car, and look at the diagram.
4. Keep the car disconnected like this for two to three minutes to clear the computer’s memory.
5. Insert the fuse back in to the box.

How do I turn off the oil life indicator?

Step 1: Turn your Civic ignition on without starting your engine or press the start button twice without touching the brake. Step 2: Press the Trip knob repeatedly until the Engine Oil Life percentage displays. Step 3: Press and hold the trip knob until the Engine Oil Life percentage starts to blink.

How to reset Ford Explorer oil change light?

How to Reset 2006–2010 Ford Explorer Oil Change Light: Turn the ignition to run, one position before starting engine. Press the TRIP/RESET button to cycle to “SETUP MENU HOLD RESET”. Now press and hold the button for 2 seconds until “RESET FOR SYSTEM CHECK” is displayed, then release.

How do I reset the oil life on my car?

Depress the “TRIP/RESET” button then select “OIL LIFE RESET.” The message display will show “HOLD RESET IF NEW OIL.” Press and hold the “TRIP/RESET” button for more than two seconds to reset the engine oil life. Once the procedure has been completed, “OIL LIFE SET TO 100%” will be displayed.

Is there a reset button on a Ford Explorer?

Okay, so it can be a bit tricky on these Ford Explorers to do it if you’ve never done it. So basically, all you will need to use is the SELECT/RESET button on the instrument cluster, which serves as both a select button and a reset button. Alright, so the first thing we do is: Do not start the engine!

How often should I Reset my Oil Change display?

You should reset this display every time you change the oil, which should be done every 5,000 miles or 180 days. Locate the “TRIP/RESET” button on your vehicle’s control switch. Press and hold the “TRIP/RESET” button to select the “SYSTEM CHECK” option.