How do I program my EZ Pro Jr 8300 Series?

How do I program my EZ Pro Jr 8300 Series?

Turn PROGRAM dial to choose program A, B or C. Press SELECT to choose the zone you want for the selected program (A, B, or C). With the zone number displayed on the LCD, press ADJUST to adjust the RUN TIME for that zone. RUN TIMES can be set from 1 minute to 1 hour 59 minutes.

How do I program my Nelson Smartzone EZ?

The SmartZoneTM EZ allows three start times per program. Turn the large dial to the START TIMES position. Press SELECT to select the start time you want to set (1, 2, or 3). Press ADJUST to set the time of day the program will start.

What is a Nelson valve?

SKU : NV-7901. This dependable Nelson® valve offers heavy-duty, corrosion-resistant materials for years of trouble-free service. The glass-reinforced nylon body and bonnet prevent leaks and breaks while the stainless steel plunger prevents seepage. Features an easy-to-use flow control and manual internal bleed.

How do you set up a sprinkler zone?

Sprinkler System Installation in 10 Steps

1. Step 1: In-Ground Sprinkler Overview.
2. Step 2: Dig the Trenches.
3. Step 3: Make the Water Connection.
4. Step 4: Install the Zone Valves.
5. Step 5: Place the Pipes in the Trenches.
6. Step 6: Connect the Pipe at the Valve Box.
7. Step 7: Install the Pop-Up Sprinklers.
8. Step 8: Roll Out the Irrigation.

What is irrigation control valve?

Irrigation Control Valves: These are the valves that turn on and off the sprinklers, they also may be used for drip irrigation systems. Other names sometime used for them are irrigation valve, sprinkler valve, solenoid valve, and lawn valve. Sometimes they are incorrectly called Garden Valves.

Does a sprinkler system add value to your home?

A sprinkler system adds value to a home because it offers time-saving and energy-efficient lawn maintenance. According to freshome.com, “An irrigation system that works properly and covers the full yard can add value.” Proper maintenance and upkeep of a sprinkler system contribute to its added value.

Can a Nelson ez pro be used without instructions?

This controller offers great features in the standard models and the added full function radio capability in the “R” models. The EZ Pro™ is so “EZ”, you’ll probably be able to install and program this feature-packed controller without instructions.

Can a sensor be installed on an EZ pro?

The EZ Pro™is equipped to operate a sensor with normally-closed leads. The sensor port on the EZ Pro™is the first tool-less connector on the interconnect board (see Figure 2). To install a sensor, remove the factory-installed jumper wire from the sensor connector on the terminal strip and insert the sensor wires.

How to install a Nelson ez pro transformer?

Page 7 INSTALLATION INSTRUCTIONS For models 8604, 8606, 8608, 8612, 8616, 8620, 8624 (see figure 1) Remove the transformer cover by loosening the two screws. Attach AC wires to transformer wires using wire nuts.

What kind of wire does the EZ pro use?

All zone, pump and sensor wire connections made inside the EZ Pro™utilize tool-less connectors. Pull the lever into the upper position and insert the wire into the bottom. Push the lever down to lock in the wire.The terminal strips in the EZ Pro™controller accept 14 AWG (1.6mm) wire or smaller. Connecting Master Valve or Pump-Start Relay