How do I change the air filter on my American Standard 80 Freedom?

How do I change the air filter on my American Standard 80 Freedom?

How do I change the air filter on my American Standard 80 Freedom?

How to Install an Air Filter in a American Standard Freedom 80 Gas Furnace

  1. Turn the two latches on the blower door one quarter turn clockwise to unlock the blower door.
  2. Tilt the blower door forward to expose the filter.
  3. Push the filter retaining bracket toward the back of the unit.

How often should you change a 1 inch furnace filter?

In general, this is how often changing furnace filters needs to be done: For 1- to 2-inch filters, replace them every 1 to 3 months. For 3- to 4-inch filters, replace them every 6 to 9 months. For 5- to 6-inch filters, replace them every 9 to 12 months.

What MERV rating does American Standard recommend?

We recommend that everyone uses an HVAC filter that has a MERV rating of 8 or higher.

How often should you change air filter?

For basic 1″–3″ air filters, manufacturers typically tell you to replace them every 30–60 days. If you suffer from light to moderate allergies, you could install a better air filter or replace them even more regularly.

How often should you replace AC filter?

You should replace these about every 90 days, if you have no allergies, but AC pros typically recommend every 45 days for max efficiency. Be sure to replace them with the right size and type of air filter. If your AC was working properly, you could remove the filter and buy one that is identical to it.

Where is the HVAC filter located?

The filter usually fits in a slot on the air return side of the unit. These systems are usually found in smaller basements or crawl spaces where space is limited. The filter typically slides into a slot above or below the HVAC unit.

What happens if you don’t change your air filter?

If you don’t change your AC filter, it will begin to fail. It will no longer be able to filter the air properly, letting dust and contaminants get into the AC. Dust jams the moving parts of an AC such as fan motors and valves. This is how dust makes the unit less energy efficient (at best) and can lead to breakdowns.

Why does my furnace filter get dirty so fast?

One-inch pleated filters quickly get dirty because they’re designed to catch more airborne contaminants. Think of 1-inch pleated air filters as a fine fish net with a very small gaps: it catches everything from big to small fish, but that also means the net fills up with fish faster (say that 3 times fast).

Is MERV 13 bad for HVAC?

MERV 13 air filters are the highest-rated air filters for home use. Any air filter with a rating higher than 13 will restrict air flow to the point of which could cause damage to your HVAC system, resulting in an added expense to fix it.

Is MERV 11 too restrictive?

Air filters with higher MERV ratings can filter more, but the thickness of the filter material can restrict airflow. Restricted airflow can decrease comfort, increase energy use, and accelerate the wear and tear of HVAC components. In most cases, a MERV 11 air filter isn’t too high for residential use.

What happens if you don t change your air filter?

Is the American standard freedom 80 air filter reusable?

The American Standard Freedom 80 Gas Furnace comes with a reusable filter that can be cleaned with a vacuum cleaner or by washing it with detergent. Instead of reusing the filter, the American Standard Freedom 80 can be used with disposable filters.

Where can I get a new American Standard furnace filter?

The replacement filters for the American Standard Freedom 90 is found in the chart below. The chart corresponds to the airflow configuration and cabinet width of your unit. Contact a top-rated local expert to help with all of your home’s HVAC needs.

Where are the filters on a Freedom 90 blower?

For most upflow models the filter will be found in the bottom or side of the blower cabinet. For downflow models the filters are found in the blower vent. The replacement filters for the American Standard Freedom 90 is found in the chart below. The chart corresponds to the airflow configuration and cabinet width of your unit.

How long does an American standard air filter last?

Captures a wide variety of airborne allergens including dust, mold, pet dander, and dust mites to extend the life of your air cleaner filter. Lasts up to 3 months. Replaces American Standard® pre-filter #BAYFTAH21W1A.