How do I program my Samsung universal remote to my DVD player?

How do I program my Samsung universal remote to my DVD player?

How To Program A Samsung Remote To A DVD Player

1. 1 – Turn your DVD player off.
2. 2 – Press the Mode button on your remote to switch the remote to DVD mode.
3. 3 – Press the Set button on the remote control.
4. 4 – Enter the three digit DVD player code listed in your TV’s user manual.

Can a universal remote work on a DVD player?

Can a universal remote control be programmed to operate a Blu-ray Disc player? The DVD button on recently-manufactured Sony® universal remote controls can be programmed to control Blu-ray Disc® players. It may be possible to use this same button on non-Sony remote controls as well.

How do I program my universal DVD remote?

How to program a universal remote to a DVD player, Blu Ray player, or TV:

1. Turn on the device.
2. On the remote control, press the corresponding device button – “TV”, “DVD” or “AUX.”
3. Press and hold the “RCU SETUP” button until the device key blinks twice.
4. Press “9” “9” “0” using the number pad on the remote.

How do I program my Samsung Blu Ray remote?

Press and hold the SETUP button until the red indicator light stays on (approximately 2 seconds) and then release the SETUP button. 4. Press and release the desired device button on the remote (DVD/BLU-RAY). The red indicator will blink once and then remain on.

How do you program a Samsung universal remote?

Follow the below steps to use the Universal Remote option:

1. 1 Using your remote, select Home.
2. 2 Scroll left and select Source.
3. 3 Scroll up and select Universal Remote.
4. 4 Select New Device.
5. 5 Select the type of device you are trying to connect your remote to e.g. Blu-ray player.
6. 6 Select the brand of your device.

Can you replace a DVD remote?

If you need a replacement of a remote for your TV or DVD Players, you can get a decent one for around $10. And most of these types of remote can work with multiple devices. Keep in mind that most inexpensive universal remote uses IR (Infra-Red) light. So, the original manufacturer’s remote has to be IR remote.

What do you do if you lose your DVD remote?

If you can’t find your DVD player or Blu-ray player remote control, or it has stopped working, don’t despair. You can often still play media using buttons on the device itself. You can also use a universal remote or, with some models, a smart phone app to control the player.

How do I program a Samsung remote?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.