How do I use iP2770 Resetter?

How do I use iP2770 Resetter?

How do I use iP2770 Resetter?

Canon Pixma iP2770 Resetter

  1. Turn off the printer without pulling the power cords.
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Then Press Resume button 5 times then let BOTH buttons go.

How do I fix error 5B00 Canon iP2770?

How to Fix Canon Pixma iP2770 error 5B00

  1. Turn off printer.
  2. Press and hold RESET button.
  3. Press and hold POWER button.
  4. Released RESET button, POWER still pressed.
  5. Press and released RESET button 5 times.
  6. Released POWER button.
  7. When computer detect FOUND NEW HARDWARE, wait about 20 seconds and press CANCEL.

How do you use the Canon resetter tool?

How to use Service Tool V3400:

  1. Download Canon Service Tool V3400.
  2. Set the printer to Service Mode.
  3. Run the Service Tool V3400.exe program.
  4. Select the connected USB port number from the USB PORT.
  5. In the Ink Absorber Counter section of the Service Tool, select MAIN from the Absorber pull-down menu.

How do I fix error 5b00?

How to fix Canon printer error 5b00

  1. Step 1: Unplug the device.
  2. Step 2: Press down and continue to hold the power button of the printer and plug the power cord into the wall socket.
  3. Step 3: Hold the power button until the printer starts resetting itself.
  4. Step 4: Wait for the green power light in the printer to turn off.

What does error 5b00 mean?

The 5b00 error usually denotes a situation when a user cannot print due to the improper usage of the ink cartridge.

How do you fix an almost full ink absorber?

Press and hold the “Power” button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the “Power” button again. This resets the printer’s internal memory and overrides the “Ink Absorber Full” error code.