How do you program a hunter 44155c thermostat?

Posted on July 27, 2021
by Yunus Cook
July 27, 2021
0 comments

How do you program a hunter 44155c thermostat?

Push “Program,” then adjust the time and temperature settings by pushing the up or down arrows to change the hour, then “Program” to move to the minute setting. Push the up or down arrow to change the minute, then “Program” to move to the temperature setting.

How do you set a hunter thermostat?

Hold down one of the UP/DOWN arrow keys until the display flashes. Use the arrow keys to move the temperature setting to the desired temperature. Press the HOLD/RETURN button. The thermostat will now hold the temperature at the setting until the override is cancelled.

What does Reco mean on a Hunter thermostat?

Asked by rachel on 08/22/2008 4 Answers Auto recovery calculates the time needed to adjust the temperature to the next program setting. When the thermostat is in Auto Recovery mode, the display will flash alternating messages of RECO and the time.

How do I reset my hunter 44110 thermostat?

Press and hold the Up key. Use a paper clip to press the reset key. Once all the LCD segments turn on, release the Up key. other keys during the reset process.

Why does thermostat say wait?

The “Wait” message on a Honeywell Thermostat means the thermostat is waiting to activate the HVAC system. This is done to prevent damaging the HVAC system compressor. If the system is working properly, then “Wait” should disappear after a few minutes. It will then resume normal operation.

What is the installation manual for a hunter thermostat?

Page 4 Model 44155C Model 44155C Congratulations! Thank you for choosing a Hunter programmable thermostat. Your new Hunter thermostat will provide years of reliable service and year-round energy savings. Please read this manual before beginning installation and save this booklet for complete…

Where can I find the Hunter Fan manual?

When to turn off Cool Mode on Hunter 44155c?

“HI” will be displayed if the tem- lower than 30˚F (0˚C). (35˚C), and automatically cut-off in Cool mode if the temperature drops below 40˚F (4˚C). 3. Compressor Protection

Where is the He / HG switch on a hunter thermstat?

Lift the thermostat cover and set the SYSTEM switch to OFF and the FAN switch to AUTO. Locate the HE/HG switch on the back of the thermostat. Set the switch to HG (default) for gas furnace and oil burners. Set the switch to HE for electric furnaces. (The switch has no effect when the system is set to cooling mode.)