How do you remove a VZ bumper?

How do you remove a VZ bumper?

How do you remove a VZ bumper?

Troy711

  1. Pop the bonnet.
  2. Turn the wheel full lock left (this gives you better access).
  3. Turn the wheel full lock right.
  4. Put your fingers in between the bumper and plastic inner gaurd (as shown).
  5. Repeat STEP 4 with right side of bumper.
  6. The front bumper should now be sitting like the picture below on both sides.

How do you take the back bumper off a Commodore?

You need to grab the bumper bar inside the rear wheel arch near the top and firmly pull it away from the body work. Do the same on the other side of the car. The bumper is still clipped to the rear of the car, pull it away from the car from either side.

How do you remove a VX rear bumper?

Open the boot and remove the screws retaining the top of the bumper to the body. Then in the boot, remove the carpet coving the tail lights and remove the nuts that hold the rear bumper on either side of the of the boot. Then remove the screws located in the wheel arch. Check under the bumper for any screws down there.

How do you remove a VY bumper?

before you “push the bar forward” pull out the sides, there are tabs where it kinda locks in and then should come off very easily.. with one hand push the bumper right under the headlight in(pushing bumper towards the back) with your other hand reach into the wheel arch atthe top of the bumper and pull straight out.

How do you remove the front bumper of a Commodore?

  1. Unscrew the two bolts in the centre of the bumper (Red), then remove the two scrivets (Green).
  2. Removal all screws running along the bottom of the bumper.
  3. Now we need to remove the bolts which attach the bumper to the fender.

How do you remove a VF Commodore rear bumper?

To remove the bumper grab the top of the bumper inside the rear wheel arch and with a firm pull, pull it away from the body – the clips will pop out of the clip points along the side of the car. Then do the same on the other side of the car.

How do I remove my VY front bumper?

How do I remove my front grill?

Easy to remove the grille, lift the bonnet, remove the 2 black bolts on the top which secure the top of grille to the surrounding frame, remove the 2 plastic clip in plugs using a flat blade screwdriver, then use a flat bladed implement to gently lift/pry up the tags along the bottom & side of grille one by one, which …