How do you reset the toner light on a Brother HL-2270DW?
How do you reset the toner light on a Brother HL-2270DW?
How do you reset the toner light on a Brother HL-2270DW?
Brother HL-2270DW – Reset Toner Cartridge
- Ensure the printer is turned off.
- Open the printer front cover.
- Hold the Go button while turning the printer on.
- When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button.
- Press the Go button two (2) times.
How do I turn off the toner light on my Brother printer?
Press the ‘go’ button (or “start’ button) 5 times. The toner light should be off (the error light may be flashing).
Why is my Brother printer saying there is no toner?
Your Brother printer will display the “no toner” message if the printer’s drum unit assembly or your toner cartridge was installed incorrectly. So if your Brother printer does not detect toner, you need to uninstall and reinstall the drum unit assembly and toner cartridge to rectify the problem.
Why does my Brother printer say no toner?
The message ‘No Toner’ indicates that the toner cartridge or the toner cartridge and drum unit are not installed correctly. Open the front cover and remove the drum and toner assembly. …
Why does my Brother printer keep saying no toner?
The No Toner message appears if the toner cartridge or the toner cartridge and drum unit assembly is not installed correctly. Remove the toner cartridge from the drum unit, and reinstall the toner cartridge back in the drum unit. Reinstall the toner cartridge and drum unit assembly back in the machine. >
Why does my printer keep saying no toner?
The message ‘No Toner’ indicates that the toner cartridge or the toner cartridge and drum unit are not installed correctly. 1. Open the front cover and remove the drum and toner assembly. We recommend that you place the toner and drum assembly on a piece of paper in case they accidentally spill or scatter toner.
Why does my printer says replace toner?
The message “Replace Toner” is intended to alert you that the toner cartridge has reached the end of its expected life. When replacing the toner cartridge, you MUST install a brand new, unused genuine Brother toner cartridge in order to reset the “Replace Toner” status.
Why is my Brother printer in error mode?
The reason why you get this error state message on your Brother printer is either your printer is not connected correctly, the printer jammed, low on ink, and any software changes. There can be other reasons as well, which can cause the problem of the printer in error state.