What is the code for handrails on stairs?

What is the code for handrails on stairs?

Handrail Height: 34 to 38 Inches Handrail height on the stairs should be no less than 34 inches and no greater than 38 inches. The way this is measured is to begin at the leading edge of the stair nosing and run an imaginary vertical line upward until it reaches the top of the railing.

At what height is a handrail required?

As with barriers the top surface of the handrail must be at least 865mm vertically above the nosings of the stair tread or floor surface of a ramp.

What is the maximum distance between handrail posts?

What are the OSHA requirements for railing post spacing? OSHA requires railing posts to be spaced no more than 8-feet apart on center, no matter if it’s wood, pipe railing, or structural steel. If posts are spaced more than 8-feet on center, it will no longer be OSHA compliant.

Can I use a 2×2 for a handrail?

You can’t use a two-by-four but a two-by-two as a handrail would meet code. Some large decorative handrails are permissible, as long as their design offers a finger recess that allows secure grasping.

What are the building codes for hand rails?

Residential Building Codes for hand Rails. Railings are now required, by most counties, for any potential fall greater than 30 inches. New homes will not be granted a certificate of occupancy without them. And other permitted work (ex. new deck, retaining wall etc.) will not receive final approval until fall protection is in place.

What is the accessibility Code for buildings in Georgia?

Accessibility Code for Buildings and Facilities ( related to construction commenced prior to March 15, 2012 ), please see 120-3- (.01-.54): PDF | HTML

Do you need railing in Suwanee, Ga?

Suwanee, GA. Most Georgia counties (at least Atlanta suburbs) currently follow the International Residential Codes (IRC). Railings are now required, by most counties, for any potential fall greater than 30 inches. New homes will not be granted a certificate of occupancy without them.

What is the IBC code for a handrail?

IBC 1014.3.1 Part 2: Where the handrail is not circular, it shall have a perimeter dimension of not less than 4” and not greater than 6.25” inches with a maximum cross-sectional dimension of 2.25” and minimum cross-sectional dimension of 1”.