What is the standard size of a toilet bowl?

What is the standard size of a toilet bowl?

Overall, a standard toilet will be between 27 and 30 inches deep, with a back height of 21 to 31 inches and a width of about 20 inches. An ADA-compliant version needs to have a seat height of 17 to 19 inches. This is one reason why partitions around ADA-compliant bathrooms are different.

What is the rough-in measurement for a toilet?

12 inches
The standard rough-in is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should find the rough-in measurement in the new toilet’s product information.

What are the dimensions to install a toilet?

The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall. Don’t measure from the base molding! Take this measurement from the finished wall.

Are toilet bowls all the same size?

Are toilet seats a standard size? No, there isn’t a standard size for all toilet seats, due to a variety of toilet styles. The width of the toilet bowl at its widest point. The length from the front of the bowl back to the two seat-fixing holes.

What is standard toilet height?

around 14 1/2”
Standard toilet height is around 14 1/2” from the floor to the bowl rim, without a toilet seat. In recent years toilet bowl height has increased to assist people with sitting and standing up, for the benefit of taller people, and those with physical handicaps and/or the elderly.

How do I know if a new toilet will fit?

Be sure to measure from the wall and not from the baseboard. Also, measure to any nearby water supply lines on the floor. Some toilets have a wider base that might not fit next to a supply line on the floor. It’s a good idea to measure from the bowl to a sidewall to be sure that the toilet will fit in your space.

If you prefer to measure, just to be sure, then measure from the front of the bowl to the middle of the screws at the back of the bowl/lid area. Here are the standard toilet bowl sizes: Round Toilet Bowl: 16.5 inches. Oblong Toilet Bowl: 18.5 inches.

What are the dimensions of a round bowl toilet?

Toilet Dimensions. Round bowl type models are standard in size, roughly 16 1/2 inches in length allowing for a better fit in smaller bathrooms. Elongated bowl models take up a bit more space since they are normally two inches longer (approximately 18 1/2 inches) and are typically found in recently built homes with larger bathrooms.

What is the height of a toilet bowl?

The normal toilet is 14” from the floor to the top of the toilet bowl. The ADA recommended height is 17 inches to 19 inches. This allows for easier use of the toilet, especially for taller people.

What are the different sizes of toilets?

Toilets are designed and manufactured in a range of sizes and styles with typical depths between 27”-30” (69-76 cm), widths around 20” (51 cm), and back heights from 21”-31” (53-79 cm). The distance measured to the top of the toilet seat, not the bowl height, must be between 17”-19” (43.1-48.3 cm) to be ADA compliant.