What size sand filter do I need for my pool?

What size sand filter do I need for my pool?

When deciding on a pool filter for your above ground pool swimming pool, a useful tip is to pick one that is at least 1 sq. ft. for a 10,000-gallon pool capacity. For instance, a 16” sand filtered system has a 1.55″ sq.

How long is sand good in pool filter?

3-5 years
On average, sand should be replaced every 3-5 years. This may be longer if the pool stays clear, or shorter, if the filter runs all the time. The jagged edges of the sand wear down and become smooth as the sand ages.

Is a sand pool filter worth it?

Sand Filters are still great options, especially for larger residential and commercial pools with more powerful Pool Pumps. Unlike Cartridge Filters, Sand Filters need to be sized according to your pool pump. If your pool pump is over 1.5 HP, we typically recommend choosing a Cartridge Filter over a Sand Filter.

How long should you run a sand filter for an above ground pool?

It is recommended that you turn over the water in your pool at least twice a day (refer to chart at bottom of page for your pools capacity). Run filter more in hot weather or with heavy bather load. As a general rule of thumb, turn your sand filter on 1 hour per 10° F of weather.

Can a pool pump be too big?

There is a very persistent myth in the pool world that the higher the horsepower, the better. As a result, it is probably safe to say that the majority of pools have oversized pumps. Too large of a pump can cause poor filter performance and even damage it, if the filter is not also oversized accordingly.

Do I need a sand filter with a saltwater system?

You still need the sand filter. The saltwater setup turns the salt to chloride (sodium chloride) and the ozonator kills germs etc… the sand filter filters out the algae and all the other particles before the water goes through the saltwater system.

Which is better sand or cartridge pool filter?

Cartridge filters can screen out twice as much dirt and debris as a sand filter. Its larger filtration area allows the water to progress through the cartridge removing smaller particles. Maintenance is much easier in that there is no need for a back-washing step.

How does a 22 ” sand filter work?

Eco Kleer 22″ Sand Filter with 1.5 H.P Pump & Motor by Waterway Sand filtration is highly efficient, eco-friendly and easy to use. It works like this: the pool water is pulled into the basin of the Eco Kleer. It is pushed through a bed of sand.

Which is the best sand filter for your pool?

Register a free business account Same quality as Hayward Pro Series, Waterway Clearwater & Pentair/Sta-Rite Cristal Flo II! This high performance sand filter system will keep your pool crystal clear and deliver years of trouble free operation.

When did I buy the Blue Wave sand filter?

I purchased the sand filter on 5/9/20 and it is now 8/13/20 and the pump has gone out. Before it went completely out the pump was dumping sand back into the pool. This was a much larger sand pump than the original one that came with my pool. However, at least the original one lasted a year.

How do you backwash a pool sand filter?

Backwashing – Backwashing a sand filter is very easy. Simply unplug the pump, move the valve handle to the backwash position and plug the pump back in. This reverses the normal water flow in the system, stirring the sand up and blowing the dirty water out the backwash port.