Are Hardi sprayers any good?

Are Hardi sprayers any good?

We have always owned Hardi sprayers and they are the best sprayer for their money. Never had an issue , Their Hardi help line is great too, they help you by phone while you are in the cab of the sprayer tractor.

Who owns Hardi sprayers?

Paris, France based Exel owns several global sprayer brands including Hardi International since 2007. Mike Flatt, President and CEO of Hardi North America comments, “I spent nearly 20 years of my career with ET in a variety of roles but was presented with a senior leadership opportunity with Hardi, a sister company.

Where are Hardi sprayers manufactured?

Hardi North America, which makes agricultural sprayers, announced last week that it is expanding its manufacturing facility at 1500 W. 76th St. with a $3.6 million, 15,000-square-foot addition that will house a powder coating line, creating 18 jobs.

What are the 4 main sprayer components?

Spray pressures range from near 0 to over 300 pounds per square inch (PSI), and application rates can vary from less than 1 to over 100 gallons per acre (GPA). All sprayers have several basic components: pump, tank, agitation system, flow-control assembly, pressure gauge, and distribution system (Figure 1).

What does Hardi stand for?

Definition. HARDI. Heating, Airconditioning & Refrigeration Distributors International.

How do you calculate a sprayer?

Simply incorporate the output of a single nozzle in gallons per minute (GPM) and multiply by 5,940. Then divide by the product of miles per hour (MPH) times the distance between nozzles in inches (width) on the spray boom.

How many acres will a 25 gallon sprayer cover?

The 25 gallon version shown here, allows us to spray two (2) acres easily and does not upset the center of gravity of the ATV. Mount the sprayer on the rear rack of the ATV. Use two (2) tie-down straps to keep the unit steady and in place. Placing a towel under the sprayer unit will keep it from scratching the racks.

What is the first step for calibrating a sprayer?

The first step in sprayer calibration is to determine that the spray pressure is equal throughout the spray boom.

1. Check pressure all along the boom first because there might be a restriction in the line and uneven pressure.
2. Check and compare the cab pressure with boom pressure.

What is difference between sprayers and dusters?

The main difference between dusters and sprayers is the thing that hose on sprayers are the one’s that are attached to the meters the patricide are. Sprayers mainly spray the water as showers whereas the duster only pushes the water in single go. This is the main light difference between sprayer and the duster.

How many gallons of water does it take to spray 3 acres?

Sprayers typically range from 1-3 Gallons per 1000 square feet. At that range you would need 44 – 132 gallons per acre. Your product calls for 1 Quart per Acre.

Is there a Hardi 3 pt sprayer for sale?

HARDI 503 diaphragm pump with 540 RPM PTO drive and PTO shaft Hardi Delta Sprayer – 3 pt boom, pto pump with monitor You are welcome to come, look at any item or pick up a purchase. Please contact us for item location & availability.

What kind of pump does a Hardi 850ltr use?

Hardi 850ltr – Sprayers Twin pump, ex farm condition. BNL 50 standard equipment includes HARDI 503 diaphragm pump with PTO drive, M70 spray controls and spray gun with 40’ of 3/8” hose and hose wrap. An optional 14’ horizontal fold boom, HARDI 110° ISO Snap Fit nozzles are available.

Which is the smallest trailer in the Hardi range?

Being the smallest in the large HARDI trailer range, the kinship does not fail. The RANGER is designed to meet the request for a simple and reliable trailer. This goal is reached and proven by successful worldwide sales since the introduction in 2006. At the same time RANGER is leading in its class offering a big range of different features.

Where do I Find my Hardi part numbers?

Don’t know your part numbers? Look them up here. Your cart is empty. Welcome Guest! Would you like to log yourself in?