How do I setup an FTP server on a router?

How do I setup an FTP server on a router?

How do I setup an FTP server on a router?

To set up FTP access through the Internet:

  1. Launch an Internet browser from a computer or wireless device that is connected to the network.
  2. Enter the router user name and password.
  3. Select ADVANCED > USB Storage > Advanced Settings.
  4. Select the FTP (via Internet) check box.
  5. Click the Apply button.

How upload Cisco IOS via FTP?

Use the copy ftp flash command and follow the wizard….Configure the switch to load the new IOS version.

  1. Switch#configure terminal. Switch(config)#ip ftp username User.
  2. Switch#copy ftp flash. Address or name of remote host []? x.x.x.x.
  3. The last step is to configure the switch to load the new version of IOS.

How do I transfer files from Cisco router to FTP server?

To copy a system image to an FTP network server, complete the tasks in this section:

  1. SUMMARY STEPS.
  2. enable.
  3. configure terminal.
  4. ip ftp username username.
  5. ip ftp password password.
  6. end.
  7. show flash-filesystem :
  8. copy flash-filesystem : filename ftp: [[[//[username [:password ]@]location ]/directory ]/filename ]

How do I setup a dynamic IP on an FTP server?

Other people can connect to the folder and access the files either through an FTP client or a browser with your Dynu DDNS hostname.

  1. Step 1: Install FileZilla server on your local machine.
  2. Step 2: Set up users and shared folders.
  3. Step 3: Open FTP client port (port 25) in Windows firewall.

How do I transfer files from router to router?

Copying From One Router to Another

  1. Check the image size on Router1 with the show flash command.
  2. Check the image size on Router2 with the show flash command to verify if enough space is available on Router2 for the system image file to be copied.
  3. Configure Router1 as the TFTP server using the configure terminal command.

What is the port of FTP?

port 21
FTP is an unusual service in that it utilizes two ports, a ‘data’ port and a ‘command’ port (also known as the control port). Traditionally these are port 21 for the command port and port 20 for the data port.

Why can’t I access my FTP server?

If your computer cannot connect to that server, then either your FTP software is not working correctly, or something on your computer (probably a firewall or other security software) is blocking all FTP connections. You may want to try using other FTP software such as the free FileZilla.