How do I pair my Aluratek Bluetooth transmitter?

How do I pair my Aluratek Bluetooth transmitter?

How do I pair my Aluratek Bluetooth transmitter?

With the transmitter off, press and hold the power button until you see the red and blue lights flash. Once the red and blue lights are flashing, put your receiver i.e. headset or speaker into pairing mode. They will then find each other and pair with each other.

How to charge Aluratek Bluetooth?

Charging the battery Connect the USB end of the cable provided to your PC or USB power adapter (not included) and the charger plug to the charging jack of ABT01F. Please charge the battery for a minimum of (3) hours. The Red LED will be on while charging. When charging is complete, the red LED will turn off.

How do I pair AIS01F?

Activate AIS01F pairing mode by press and hold the power button for 6-7 seconds. 3. Activate your device’s Bluetooth function and set your device to search for Bluetooth devices. Select AIS01F when it is found.

How to use AIS01F?

Activate AIS01F pairing mode by press and holding the power button for 5 seconds (If AIS01F has not been paired to any device before, it will go into pairing mode after it is powered ON.) 3. Activate your device’s Bluetooth function and set your device to search for Bluetooth device. Select AIS01F when it is found.

How do I reset my Aluratek Bluetooth transmitter?

Resetting the ABT05F

  1. Press and hold the pairing button.
  2. While holding the pairing button, connect the USB charging cable to power (either a power adapter or computer)
  3. Release the pairing button when the red and blue LED lights start flashing.
  4. The transmitter is now reset and ready to pair again.

How do I pair my aluratek ABCD54F?

Make sure ABCD54F is switched to TX 2. Connect the USB DC input to ABCD54F 3. ABCD54F will enter pairing mode automatically with TX LED flashing rapidly (Quick press the pairing button twice if it is not in pairing mode) 4. Activate your device’s Bluetooth function and set your device to search for Bluetooth device.

How do I reset my aluratek ABC01F?

Resetting the ABT01F

  1. Make sure the ABT01F is not connected/plugged to any other devices.
  2. Press and hold the power button.
  3. While holding the power button, connect the ABT01F to the charging cable.
  4. Release the power button when the lights start flashing.

How do I reset my Aluratek?

How do I reset my aluratek abcd54f?

Resetting Transmitter/Receiver Devices

  1. Make sure device is off.
  2. Move the TX / RX switch to the opposite position.
  3. Turn device on.
  4. When device starts flashing red and blue, turn it off.
  5. Move the switch back to the original TX or RX position.

How do you pair aluratek ABT05F?

Make sure ABT05F is turned off 2. Activate your device’s Bluetooth function and set your device to search for Bluetooth device. 3. Slide power button to ON side,blue LED light flashes once (When ABT05F is powered on, it will enter pairing mode directly if there is no pairing record.)