What sizes are in a 3/8 socket set?

What sizes are in a 3/8 socket set?

SAE to Metric Conversion Chart

What is the order of socket sizes?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).

What are 3 drive sizes that are used for sockets?

Common ratchet sizes include 1/4-inch drive, 1/2-inch drive and 3/8-inch drive. Having different socket wrench sizes will allow you to operate different socket sizes based on your particular needs. Most ratchets use a geared drive.

What is the next size down from 5 8?

Metric / Standard Wrench Conversion Chart

What size is a 3/8 spanner?

Imperial and Metric Spanner Sizes

What’s the next size down from 5 8?

What are the 3 ratchet sizes?

Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets. Most operate with a geared drive; those with a higher tooth count let you operate the tool with a smaller swinging motion, which is useful when there’s little room to move the handle.

What is a 3/8 drive ratchet?

3/8 inch – The middle sized, and in my opinion, most useful size for general use on a car. A 3/8″ drive can drive sockets of all sizes. It is big enough to apply quite a lot of force, but not too big to fit into tight spaces. 1/2 inch – 1/2″ sockets are generally used for nuts and bolts from around 10mm and up.

What size is a standard socket set?

The standard sizes of sockets is 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1-1/2″, 2-1/2″ and 3-1/2″. This is in the Standard measurement scale that uses inches and fractions of inches to gauge the size of a fastener. You also have the metric standard where the bolt and nut sizes are measured in millimeters.

What size socket wrench?

Socket wrenches are sold in four common sizes or drives: 1/4 inch, 3/8 inch, 1/2 inch, and 3/4 inch. When looking for American socket wrenches, remember that the 8 point sockets fit only square heads while 12 point sockets fit both hexagonal and square heads.

What is the diameter of a socket?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).