Will SCX10 axles fit a wraith?

Will SCX10 axles fit a wraith?

Re: SCX-10 axles on Wraith? You’ll have to make shorter control arms, possibly shorten the driveshafts depending on what you want your new wheelbase to be. Other than that the axles will work fine.

What is the wheel base of the Axial Wraith?

Axial SCX10 axles now under a Wraith cage with SCX10 shocks. When this project started it was AR60 axles and a wheelbase of 13.5 inches. Now with custom links and SCX10 axles, it is now sitting at 11.75 inches.

What Scale is a Axial Wraith?

The Axial Wraith™ changes the game with its impressive 1:1 scale looks, high-speed monster truck “bashability,” and technical “crawl” capabilities.

What is a Wroncho?

Wroncho: A combination of an Axial Wraith and a Axial SCX10. This is typically assumed to be Wraith axles under a SCX chassis.

What motor is in the Axial Wraith?

For scale looks, Axial moved the servo off the top of the axle and onto the chassis – just as a full-size truck has its steering box located on the frame. The Wraith 1.9 truck’s drivetrain uses a powerful brushed 540 motor to turn its proven front and rear, single piece AR44™ axles.

What is the best motor for Axial Wraith?

The Pro4 is the perfect motor for the Wraith. I pulled my motor apart and coated the sensor with conformal coating and then sealed the can up with clear silicone. I ran it in 5″ of water and mud the other day with no problems (also coated the RS Pro).

Is the Axial Wraith waterproof?

It was water resistant, but not waterproof. Found out the hard way. I used a balloon on the esc and on my bec. I applied a good amount of silicone grease and zip tied it up.

How do you bind axial bomber?

Binding- With the radio on, power up the receiver as well. Push and hold the receiver’s “BIND” button until its LED glows red and then turns off after about one second. Release the bind button. If the binding is successful, the LED will flash once and then remain on.

What turn motor is best for RC crawler?

The 55t TorqueMaster 540 Expert motor for crawling is our best suggestion. It is not overly powerful on 2 or 3s LiPo and is less likely to break parts. Faster (lower) turn counts, Pro series brushed motors, and brushless motors can break parts more easily.