How do I set up my Lexmark MS312dn?

How do I set up my Lexmark MS312dn?

Lexmark MS312dn Setup Guidance

1. Step 1: Unpacking the printer. Take out the printer from the carton box and check the components included in the package.
2. Step 2: Loading Paper. Pull out the paper tray at the bottom of the printer.
3. Step 3: Connecting the Power Cord.
4. Step 4: Installing the Printer Software.

How do I print a Lexmark test page?

Solution

1. Make sure the printer is at Ready or in Power Saver mode.
2. Press the left (<) or right (>) arrow Menu button until you see UTILITIES MENU as a choice.
3. Press the Select button.
4. Press the left or right Menu button to cycle through these choices until Print Menus appears.
5. Press the Select button.

How do I print a Lexmark configuration page?

From the printer control panel, press System. Press or repeatedly until Information Pages appears, and then press OK. Press or repeatedly until Configuration appears, and then press OK. After the configuration pages print, Select Function will appear on the display.

Why is my Lexmark printer not connecting to WIFI?

There is a hardware failure on the printer. Contact Lexmark Technical Support. The internal network adapter is not being recognized or has become internally disconnected inside the printer. Reset the printer’s network settings under the printer’s “Network Settings” menu option and then reconfigure the printer.

How do I make my Lexmark printer discoverable?

Manual Connect

1. Press the Home button to get to the Home Screen.
2. Navigate to Setup and hit the OK button.
3. Navigate to Network Setup and hit the OK button.
4. Navigate to Wireless 802.11 b/g/n and hit the OK button.
5. Navigate to Network Connection Setup and hit the OK button.
6. Navigate to wireless and hit the OK button.

How do I fix printer not detected?

Fix 1: Check the printer connection

1. Restart your printer. Power off and then power on your printer to restart it.
2. Check the connection issue. If your printer is connected by the USB cable, ensure the cable is not damaged, and it connects firmly and correctly.
3. Check the network connection.

Where is the menu button on Lexmark printer?

Press the Menu ( ) button on the printer operator panel. Press the down arrow button ( ) until the check mark on the left is in front of Reports. Press the select ( ) button once….Solution.

How do I put my Lexmark printer in discoverable mode?

Firstly, Connect your computer and Lexmark printer to the same wireless network. Now click on the ‘Start’ button and then go to the control panel and adjust the computer settings. Select ‘Add a new Device’ in the Hardware category. Make sure that your Lexmark printer is ON and discoverable mode.