What does AL01 mean?
What does AL01 mean?
What does AL01 mean?
AL01 is the error code for flooded base. If so then your machine will more than likely be leaking into the base. If you gently tilt the machine to one side and water leaks out then this is the case.
How do I reset my Hotpoint dishwasher?
How do you reset a Hotpoint dishwasher? Press the Start / Reset button to reset the dishwasher and wait 2 minutes. If the problem persists, reset (restart) the dishwasher by disconnecting the appliance from the power supply via the power switch / fuse box for 30 seconds.
Why are all the lights flashing on my Hotpoint dishwasher?
The reasons for this happening include a faulty water intake valve, water supply problems. Or water pressure. Kinked or blocked hoses may also be culprits. F07 with flashing lights 1,2, and 3 – this configuration of lights directs the cause to a damaged water turbine.
How do I fix Hotpoint dishwasher error 5?
Check the filter or sump is not blocked. Check the pressure switch is not stuck in the empty position (contacts 11-12) or the pressure chamber or air tube are either blocked, unattached or split. Check the wash pump is circulating the water. Check the wiring to the pressure switch.
How do I reset my Hotpoint FDL570 dishwasher?
Press the “ON/OFF/RESET” button on the left of the controls, turn the “Wash Cycle Select” knob to your chosen option and hit “Start/Pause.” The FDL570 doesn’t start washing until you press the “Start/Pause” button. Don’t press “Delay Start” if you want the appliance cleaning immediately.
Why is my Hotpoint dishwasher not starting?
If the thermal fuse blows, it will prevent the dishwasher from starting. To determine if the thermal fuse is defective, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it.
How do I fix a blinking light in my dishwasher?
This problem often manifests as the Option and All Cycle lights blinking and usually signifies that the door opened in the middle of a cycle. The solution can be as simple as firmly closing the door until it latches. The lights should stop flashing, and the cycle should automatically resume shortly after.
What does a 5 Mean on a Hotpoint dishwasher?
Pressure switch
Hotpoint Dishwasher Error codes
| Flashing Number | Fault |
|---|---|
| A-4 | Thermistor circuit |
| A-5 | Pressure switch |
| A-6 | Time out on filling |
| A-7 | Turbine faulty |
Why is my Hotpoint dishwasher not working?
In order for a Hotpoint dishwasher to fill it must first drain. Ensure the filter in the base of the dishwasher is clean and free from any blockages. Check that the waste hose has not become trapped or kinked as this could also result in a failure to empty the waste water out of your Hotpoint dishwasher.
Why is my Hotpoint dishwasher not draining?
One of the most common reasons your dishwasher might not drain properly is due to a block or clog in the drain path. This path includes the sump, pump, drain hose, and sink drain. Maybe any one of them could have trapped food particles. Or even a buildup of grease that prevents water from draining after a cycle.
Does a dishwasher have a reset button?
Yes, you can reset your dishwasher by pressing the Start/Reset button on the appliance and waiting a few minutes. If your dishwasher still doesn’t start, you may need to reboot the entire system by turning off power to the appliance at the house circuit breaker or fuse box.