Can you use drywall around a tub?

Can you use drywall around a tub?

The walls surrounding the tub need to use water-resistant drywall or, preferably, cement board instead of regular drywall to protect them from moisture damage.

Do you drywall over the tub flange?

You can bring sheetrock right down to the flange just like in the picture as long as you aren’t going to tile over it. I would suggest using sheetrock over backer board on surfaces which you intend to paint.

Should I put drywall behind tub surround?

Fiberglass and acrylic tub and shower enclosures come with a flanged edge that attaches directly to the wall studs, and the proper way to hide this flange is to install drywall over it.

Does drywall go over lip bathtub?

Cement board is a better option, but water resistant drywall can work, especially if this tub does not include a shower head. Whatever you use, it sits ON the lip, and the tiles go over the lip to the tub.

What should I put above my tub surround?

Regular drywall will work fine on a tub surround as long as it’s installed properly and painted with proper paint. Don’t let the drywall sit right on the lip of the surround, as it will eventually start “wicking” water and cause issues. Leave a 1/4″ gap, prefill with setting compound, flat tape, and finish.

How do you fill the gap between tub and surround tub?

Fill gaps up to 1/4 inch in width with caulk. If you have tile on the wall adjoining the tub, select a caulk that matches the color of the grout. If your gap is smaller than 1/8 inch in width, use regular caulk; fill gaps larger than 1/8 inch with a sanded caulk.

What kind of drywall goes behind a tub surround?

Install cement board or an equivalent moisture-resistant backing material on walls behind tub and shower enclosures composed of tile or panel assemblies with caulked joints. Don’t use paper-faced backer board, i.e., paper-faced drywall, behind seamed tub and shower enclosures.

Should you put plastic behind shower walls?

They are required beneath your shower pan and behind your shower walls. Moisture barriers can be made of polyethylene or a membrane that is rolled directly onto the drywall. No matter what they are made of, without them, your shower is subject to moisture damage.

Does cement board go over tub lip?

The best approach when installing cement board or other tile backer around a tub is to keep the cement board out of the lip area. above the lip of the tub. Then apply a generous amount of thin-set to the bottom bathtub tile and position it 1/8 in.

How is the best way to hang drywall around a bathtub?

Position the cut piece of water-resistant drywall horizontally against the bathtub’s rear wall and rest its bottom edge on the lip of the bathtub ledge. Make certain the sheet is held level, then secure the piece to the wall framing using galvanized or coated drywall screws to prevent rusting.

Do you have to seal the wall around a bathtub?

But some bathtubs have drywall surrounds. Water easily degrades drywall, so you must seal the edges to prevent moisture from entering the wall space behind the drywall. If you don’t, the moisture buildup likely will lead to mold growth. In severe cases, you might have to rip out the drywall to deal with the mold problem within the wall.

What should I use to finish drywall around bathtub flange?

Wipe the tape flat with the 6-inch drywall knife. Work slowly to avoid scratching the bathtub flange. Apply a coat of joint compound over the installed tape after it dries.

How to install drywall in a new bathroom?

Bathroom Drywall Installation. 1 Step 1 – Take Measurements. Once your tools and materials are in place, begin by taking measurements all around the bathroom. Take note of any light 2 Step 2 – Cut Drywall and Openings for Fixtures. 3 Step 3 – Hang Drywall. 4 Step 4 – Tape and Mud the Joints.