Are Bosch freezers good?

Are Bosch freezers good?

GHI Expert Verdict The Bosch KGN36XW35G Serie 4 fridge freezer did well in our testing, especially when checking how the temperature spread in each compartment. Both the fridge and freezer had consistent temperatures from top to bottom. The fridge was a bit slower at doing this though.

Are integrated freezers all the same size?

Integrated freezers are usually a standard size so that they can fit into 60W x 60D housing unit. So, the main measurement you need to note down is the height, as this can vary. You can find all our product dimensions on our product pages.

Do integrated freezers have to be integrated?

Tall integrated fridge freezers have to have a housing, anything integrated under worktops does not need a unit, just a door either semi integrated or fully and if the appliance under the worktop is on the end of the run then you will need an end panel.

Where are UK Bosch fridge freezers made?

Appliance Brands – Country of Origin

Can a normal fridge freezer be integrated?

Can A Freestanding Fridge Be Integrated? Sort of but not fully. A freestanding fridge freezer won’t be able to fit inside a housing cabinet, nor can it have kitchen cabinet doors attached to it – it’s just not designed to.

Is it easy to fit an integrated fridge freezer?

Integrated fridge-freezers are made for aesthetics. If you want to have a kitchen with a consistent look and feel, then a built-in fridge freezer is the way to go. However, if there’s one downside to having a fridge of this sort, it’s the difficult installation and repair. Replacing is just as hard.

Are integrated fridge freezers worth it?

Integrated appliances are a great way to save on space as you are able to add appliances in unique areas – integration allows you to put the freezer where a cupboard would normally reside for example. Thus if your kitchen is on the smaller side, integration might be just the ticket.

Do I need a carcass for an integrated fridge?

Under counter fridges/freezers don’t have a carcass. Cut the panels to desired height and scribed to the wall with a 600 mm gap between panels. The fridge and freezer will have adjustable feet and the door will hang on the appliance. You may wish to cut the front to allow plinth to run through too.