How do you reset a NordicTrack x9i treadmill?

How do you reset a NordicTrack x9i treadmill?

How do you reset a NordicTrack x9i treadmill?

How do I reset my treadmill?

  1. Unplug the treadmill for at least 30 seconds.
  2. Remove the safety key and plug the treadmill back in.
  3. Push the “Reset” button once so that “10” appears on the display.
  4. Press the “Enter” button four times, then “Start” once, then “Enter” once more.
  5. Replace the safety key.

Why is my NordicTrack not working?

If the treadmill is plugged in and the power still does not work, make sure the key is in the console and that the Reset/Off circuit breaker has not been tripped. Press the switch to “Reset” if it has been tripped. Remove the console key and unplug the treadmill to loosen the walking belt if it slows when in use.

Why does my NordicTrack treadmill stop?

Treadmills require lubrication to limit the amount of friction between the platform and belt. When the friction increases to a certain point, the machine is automatically set to power off. This may be the cause for the machine to stop working suddenly. Try lubricating the belt.

Where is the reset button on my NordicTrack treadmill?

With your NordicTrack hooked up to a power source, make sure that the machine is not moving or in a program before you proceed. Then, locate the reset button underneath the console. It appears like a hole and will require a Q-tip, bobby pin, or other like object to press the button.

Where is reset button on NordicTrack?

To locate the switch on your equipment, check your owner’s manual. If your machine is a NordicTrack rower, simply unplug it. Next, locate the pinhole, which will most likely be found on one of the sides or on the back of your console. If you have difficulty finding it, please consult your owner’s manual.

How do you fix a treadmill belt that won’t move?

Belt Centering A treadmill belt can shift to the right or left over time. If it shifts enough, this may cause the belt to stop moving. Stand at the back end of your machine and inspect the belt. If it has shifted, you will need to center it by turning the rear roller adjustment bolts.

Is it worth repairing a treadmill?

Maintenance services ensure that treadmills continue to run smoothly and quietly. If they do break, fixing them is relatively affordable (compared with replacing a treadmill). The cost of maintenance and repair is generally low, depending on the number and type of parts need that to be replaced.