How many group do Imsbc code have?

How many group do Imsbc code have?

three groups
The IMSBC Code categorises cargoes into three groups: Group A – cargoes which may liquefy if shipped at a moisture content exceeding their Transportable Moisture Limit (TML)5. Group B – cargoes which possess a chemical hazard which could give rise to a dangerous situation on a ship.

What does Imsbc code stand for?

International Maritime Solid Bulk Cargoes Code
The primary aim of the International Maritime Solid Bulk Cargoes Code (IMSBC Code), which replaces the Code of Safe Practice for Solid Bulk Cargoes (BC Code), is to facilitate the safe stowage and shipment of solid bulk cargoes by providing information on the dangers associated with the shipment of certain types of …

What is Section 8 in the contents of Imsbc code?

1 to 2.7. 7.2. 6 of the IMDG Code. Class 8: Corrosive substances: The materials in this class are materials which, by chemical action, will cause severe damage when in contact with living tissue or will materially damage, or even destroy, other goods or the means of transport.

What are Group C cargoes in the Imsbc code?

A Group C cargo is a cargo which is neither liable to liquefy (Group A) nor to possess chemical hazards (Group B).

What causes liquefaction of cargo?

Liquefaction is a frequently occurring problem taking place when transporting wet granular solid bulk cargoes on board bulk carriers. Liquefaction of a solid bulk cargo can occur when excessive dynamic loading, induced by rough seas and vessel vibrations, is transmitted to the cargo.

What is transportable moisture limit?

The Transportable Moisture Limit of cargo is the maximum gross water content by weight that liquefiable solid bulk cargo may contain during transport without risk of liquefaction.

What is the meaning of BC code?

marine. The Code first adopted by IMO in 1965 and updated regularly since then by the Subcommittee on Containers & Cargoes. Since 1991, the BC Code has been included in Chapter VI of the 1974 SOLAS Convention.

Do bulk carrier have to adhere to both the IMDG Code and Imsbc code?

Carriage of dangerous goods in packaged form is amplified through provisions of IMDG Code and solid from in bulk through IMSBC Code. For packaged Dangerous Goods, the carriage is prohibited, unless they are carried in compliance with the IMDG Code.

What are the contents of IMDG Code?

IMDG code contents

• Part 1 General Provisions, definitions and training.
• Part 2 Classification.
• Part 3 Dangerous goods list – contained in Volume 2.
• Part 4 Packing and tank provisions.
• Part 5 Consignment procedures.
• Part 6 Construction and testing of packages, IBCs, portable tanks, MECGs and road tank vehicles.

How is stowage factor calculated?

The stowage factor is calculated: one large ton or 2240 pounds multiplied by volume in cubic feet. The result is divided by the weight of the load in pounds. The stowage factor thus determined shall be the number of cubic feet required to load one long tonne of a given load.

What is Blu code?

The Code of Practice for the Safe Loading and Unloading of Bulk Carriers (BLU Code) was developed with the aim of preventing accidents or loss of ships carrying solid bulk cargoes as a result of improper loading and unloading practices.

What is the main danger in liquefaction of the bulk cargo?

The main risk for a vessel carrying cargo that may liquefy is shifting of the cargo. The shifting may be caused by liquefaction, as explained in the previous section, or by sliding of the cargo.

How many groups are there in the imsbc code?

How many groups are there? The IMSBC Code categorises cargoes into three groups: Group A: cargoes that may liquefy – see Factsheet 2. Group B: cargoes that possess a chemical hazard (e.g. flammable, corrosive, emits gas when wet, etc), which could give rise to a dangerous situation on a ship.

What are the bulk cargo groups in imsbc?

BULK CARGO GROUPS Group C: Cargoes that do not liquefy or possess a chemical hazard Iron Ore Pellets Cement Limestone Gypsum BULK CARGO GROUPS Grain in Bulk: IMO International Code for the Safe Carriage of Grain In Bulk, 1991 Timber Cargoes:

What are the sampling procedures in imsbc code 4.6?

SAMPLING PROCEDURES Section 4.6 of the IMSBC Code outlines the Sampling Procedures for Concentrate Stockpiles: • Consignments < 15,000 tonnes = 1 x 200g sub- sample each 125 tonnes • Consignments > 15,000 tonnes < 60,000 tonnes = 1 x 200g sub-sample each 250 tonnes • Consignments > 60,000 tonnes= 1 x 200 g sub- sample each 500 tonnes

What is the imsbc code group for iron ore?

INACCURATE CARGO DECLARATIONS Example 2 Actual Description Iron Ore Fines IMSBC Code – Group A Safe to Load as MC below TML AWARENESS ABOARD / EARLY WARNING SIGNS Prevention is recognising the early warning signs AWARENESS ABOARD / EARLY WARNING SIGNS Prevention is recognising the early warning signs