What does ip route add do?

What does ip route add do?

What does ip route add do?

One can use the ip command for adding a static route to a different network that cannot be accessed through your default gateway. For example, VPN gateway or VLNAN might need to use the ip command.

How do I add a route to my ip route?

The easiest way to add a route on Linux is to use the “ip route add” command followed by the network address to be reached and the gateway to be used for this route. By default, if you don’t specify any network device, your first network card, your local loopback excluded, will be selected.

How does ip route work?

IP Routing describes the process of determining the path for data to follow in order to navigate from one computer or server to another. A packet of data traverses from its source router through a web of routers across many networks until it finally reaches its destination router using a routing algorithm.

What does ip route 0.0 0.0 mean?

IP route 0.0. 0.0 Fa0/0 in plain English means “packets from any IP address with any subnet mask get sent to Fa0/0”. Without any other more specific routes defined, this router will send all traffic to Fa0/0.

What is Route add command?

To add a static route to the table, you’ll type a command using the following syntax: route add destination_network MASK subnet_mask gateway_ip metric_cost. So if you wanted to add a route specifying that all traffic bound for the 192.168. 151.0 subnet went to a gateway at 192.168.

How do I add a route to Windows?

Add a Static Route to the Windows Routing Table You can use the following syntax:

  1. route ADD destination_network MASK subnet_mask gateway_ip metric_cost.
  2. route add 172.16.121.0 mask 255.255.255.0 10.231.3.1.
  3. route -p add 172.16.121.0 mask 255.255.255.0 10.231.3.1.
  4. route delete destination_network.
  5. route delete 172.16.121.0.

How does IP route work?