What is the default password for MikroTik?

What is the default password for MikroTik?

What is the default password for MikroTik?

admin
All MikroTik routers are preconfigured with the following IP address, as well as default username and password: IP address: 192.168. 88.1/24 (ether1 port) Username: admin.

How can I get MikroTik admin password?

Re: forgot admin password when you lost login admin for router, isn’t ways to recovery or reset, you must reinstall by netinstall of your router OS. there is no way to reset admin password. If you forget the password and not able to login, you must reinstall router from scratch…

How do I access my MikroTik RouterOS?

To connect to the router enter IP or MAC address of the router, specify username and password (if any) and click on Connect button. You can also enter the port number after the IP address, separating them with a colon, like this 192.168. 88.1:9999. The port can be changed in RouterOS services menu.

How do I log into my RouterOS?

MikroTik Router Login

  1. Connect router cable to your Laptop or Computer. Alternatively use your wireless network.
  2. Open your web browser of choice and type IP address of your MikroTik router in the address bar.
  3. Now enter the default username and password of your router by accessing the admin panel.

What is Webfig login?

WebFig is a web-based RouterOS utility that allows you to monitor, configure and troubleshoot the router. It is designed as an alternative of WinBox, both have similar layouts and both have access to almost any feature of RouterOS.

What is RouterOS?

RouterOS is the operating system of RouterBOARD It can also be installed on a PC and will turn it into a router with all the necessary features – routing, firewall, bandwidth management, wireless access point, backhaul link, hotspot gateway, VPN server and more.

How do I reset my MikroTik wireless router?

Mikrotik Factory Reset Guide

  1. Disconnect the power cord from the unit.
  2. Hold the reset button and do not release.
  3. Plug the power cord in and wait until the ACT light starts flashing.
  4. Now release the button to clear configuration.
  5. Wait for a few minutes for the router to clear and restore the factory settings.

How can I access my mikrotik router after reset?

Open your web browser and connect to http://192.168.88.1 if the router has been reset you will not be asked for a password and should be redirected to the quickset page. The router will reboot and then be restored to our default configuration.

What is the default username and password of mikrotik router?

Every router is factory pre-configured with the IP address 192.168. 88.1/24 on the ether1 port. The default username is admin with no password. After you log in for the first time, please create a new user with a password in the “full” group, re-login and delete the default admin user.

How do I log into Webfig?

Connecting to Router When home page is successfully loaded, choose webfig from the list of available icons as illustrated in screenshot. After clicking on webfig icon, login prompt will ask you to enter username and password. Enter login information and click connect. Now you should be able to see webfig in action.

How do I access my first MikroTik router?

How to Basic Configure MikroTik using WinBox.

  1. Connect MikroTik to your Network & to your PC. Connect with an Ethernet cable (RJ45), the MikroTik’s Eth1 Port with your ISP’s Internet Modem/Router.
  2. Configure MikroTik with WinBox.
  3. Configure NAT on MikroTik.