What is WAN blocking Motorola?

What is WAN blocking Motorola?

What is WAN blocking Motorola?

WAN Blocking – Prevents Internet Control Message Protocol (ICMP) pings to the Wide Area Network (WAN) side of the SBG6580. IPSec PassThrough – Enables the IPSec Pass-Through Protocol to be used through the SBG6580 so that a VPN device (or software) may communicate with the WAN.

How do I fix my Motorola SBG6580?

Power Cycle Devices Unplug the SBG6580 from the power, wait 10 seconds, then plug back into power. Once the SBG6580 is full on and the top four LED lights are solid, power cycle all effected client devices. If this does not resolve the issue, proceed to the section Troubleshooting Wi-Fi Connections.

How do I put my Motorola SBG6580 in bridge mode?

Motorola SBG6580

  1. Open a web browser (Internet Explorer, Firefox, Safari, Chrome, etc.)
  2. In the address bar, type: 192.168. 0.1 [Then press the Enter Key]
  3. Enter Username*: admin.
  4. Enter Password*: motorola.
  5. Click Login.
  6. Under the Basic section, click Setup.
  7. Set the Primary Network Only Mode drop-down to Bridged.
  8. Click Apply.

How fast is Motorola SURFboard SBG6580?

343 Mbps
The SURFboard SBG6580 Wi-Fi Cable Modem is 3 products in one device: DOCSIS 3.0 Cable Modem, Dual-Band 802.11n Wi-Fi Access Point and 4-port Gigabit Ethernet Router. Capable of download speeds up to 343 Mbps and Wi-Fi speeds up to 300 Mbps per band, the SBG6580 is an affordable, complete solution for your home network.

What are WAN settings?

Wide Area Network (WAN) settings let you control how Google Nest Wifi and Google Wifi connect to the internet. The type of WAN connection you have is generally determined by your Internet Service Provider (ISP).

How do I enable WAN ports?

To troubleshoot your WAN or LAN port:

  1. Plug in the power adapter of your router to the power outlet.
  2. Turn on the router and wait for the power LED to become solid green or white.
  3. Take one Ethernet cable, and connect one end to any of the router’s LAN port, and the other end to the router’s WAN port.
  4. Check the LEDs.

How do I reset Motorola SBG6580?

Factory Reset Carefully insert the tip of a pen or an unwound paperclip into the reset switch and press on to it. Hold down the Reset switch for 5 -10 seconds and release it. NOTE: To assure the gateway factory defaults, hold the reset switch for 5 -10 seconds. The indicators are that all LEDs turn off.

How do I know if my Motorola modem is working?

A solid light indicates the modem is powered on. When the light is flashing the modem is scanning for a receive channel connection. A solid light indicates the channel connection is acquired. When the light is flashing, the modem is scanning for the send channel connection.

What does bridge mode do on a router?

Bridge mode is the configuration that disables the NAT feature on the modem and allows a router to function as a DHCP server without an IP Address conflict.

How many devices can connect to Motorola SBG6580?

By default, the SBG6580 operates as a gateway, and provides Internet access for multiple devices (up to 245 devices), connecting to the SBG6580 gateway. When operating as a gateway, the SBG6580 serves as a modem and a router and keeps the devices in the Local Area Network (LAN) hidden.

How do I fix WAN connection?

How do I enable WAN connection?

To configure a WAN interface: Go to the NETWORK > IP Configuration page….If you have a dynamic connection such as PPTP or PPPoE:

  1. In the Dynamic Interface Configuration section, click Add Dynamic Network Interface.
  2. Configure the dynamic interface settings.
  3. Click Add.

How to turn on advanced options on SBG6580?

Enter motorola in the Password field. Click the Login button. The Status Connection page appears. Click the Advanced Link on top of screen. The Advanced Options page appears. a. WAN Blocking – Checkmark Enable to turn on this option. b. IPSec PassThrough – Checkmark Enable to turn on this option.

What are the features of the SBG6580 router?

This document describes how to enable the following features in the SBG6580: WAN Blocking – Prevents Internet Control Message Protocol (ICMP) pings to the Wide Area Network (WAN) side of the SBG6580.

How to turn on a.wan blocking checkmark?

Enter admin in the Username field. Enter motorola in the Password field. Click the Login button. The Status Connection page appears. Click the Advanced Link on top of screen. The Advanced Options page appears. a. WAN Blocking – Checkmark Enable to turn on this option.