Which is part 1 of the BS EN 62305 standard?

Which is part 1 of the BS EN 62305 standard?

For a more detailed explanation of the general principles forming part 1 of the BS EN 62305 standard, please refer to our full reference guide ‘A Guide to BS EN 62305.’ Although focused on the BS EN standard, this guide may provide supporting information of interest to consultants designing to the IEC equivalent.

What is BS EN 1036 and BS EN 14449?

BS EN 1036: Glass in building – Mirrors from silver-coated float glass for internal use BS EN 1063: Glass in building – Security glazing – Testing and classification of resistance against bullet attack BS EN 14449: Glass in building – Laminated glass and laminated safety glass – Evaluation of conformity/Product standard

What is BS EN 410 and BS EN 673?

BS EN 410: Glass in building – Determination of luminous and solar characteristics of glazing BS EN 673: Glass in building – Determination of thermal transmittance (U Value) – Calculation method

When was BS EN / IEC 62305 published for lightning protection?

The BS EN/IEC 62305 Standard for lightning protection was originally published in September 2006, to supercede the previous standard, BS 6651:1999. For a finite period, BS EN/IEC 62305 and BS 6651 ran in parallel, but as of August 2008, BS 6651 has been withdrawn and now BS EN/IEC 63205 is the recognised standard for lightning protection.

How does BS 6651 differ from BS 62305?

It differs from BS 6651 in as much that this new part has four Classes or protection levels of LPS, as opposed to the basic two (ordinary and high-risk) levels in BS 6651. Part 4: Electrical and electronic systems within structures BS EN/IEC 62305-4 (part 4) covers the protection of electrical and electronic systems housed within structures.

When did BS EN / IEC 63205 replace BS 6651?

For a finite period, BS EN/IEC 62305 and BS 6651 ran in parallel, but as of August 2008, BS 6651 has been withdrawn and now BS EN/IEC 63205 is the recognised standard for lightning protection.

Is the BSI BS EN 287-1 still current?

BS EN 287-1 is still listed as ‘Current’ by BSI, because it is still referenced in product standards, as well as contracts, specifications. NOTE 1: the authors are not aware of the status of harmonisation of ISO 9606 1:2017 with the Construction Products Regulations (CPR), Machinery Directive, Rail Vehicles etc.

When was annex za issued for BS EN ISO 9606-1?

The wording of Annex ZA was discussed and approved by the relevant CEN and ISO committees, and BS EN ISO 9606-1 was issued in September 2017 with the approved Annex ZA. According to Annex ZA: Clause 9.3 (c) option (c) for revalidation is not be permitted for Category II, III and IV products.